Product Specification
|
Overview
|
Ruijie RG-S5760C-24GT8XS-X Full L3-Managed Gigabit Switch 24 Port, 8 Port SFP+ 10Gbps
24K Routing Table, รองรับ Dynamic Routing OSPF BGP, L3 Multicast ICT Spec อุปกรณ์กระจายสัญญาณ (L3 Switch) ขนาด 24 ช่อง
|
Fixed Ports
|
24x 10/100/1000BASE-T,
8 x 1G/10G SFP+ ports,
2 power module slots
|
Management Port
|
1 MGMT port, 1 console port, and 1 USB port, compliant with USB2.0 standard
|
Expansion Slot
|
Single expansion slot is reserved to for service modules
|
Switching Capacity
|
880 Gbps/7.92 Tbps
|
Packet Forwarding Rate
|
426 Mpps/600 Mpps
|
MAC Address
|
64K
|
ARP Table
|
24K
|
Routing Table Size (IPv4/IPv6)
|
24K (IPv4/IPv6)
|
Product Features
|
|
VLAN
|
The following are supported: 4K 802.1Q VLAN Port based VLAN Private VLAN Voice VLAN GVRP
|
QinQ
|
Basic QinQ Flexible QinQ
|
Link Aggregation
|
LACP(802.3ad)
|
Spanning Tree
|
The following are supported: STP, RSTP, and MSTP
|
DHCP
|
The following are supported: DHCP Server DHCP Client DHCP Snooping DHCP Relay IPv6 DHCP Server IPv6 DHCP Snooping IPv6 DHCP Client IPv6 DHCP Relay
|
Multiple Spanning Tree Protocol (MSTP) Instances
|
64
|
Maximum Aggregation Port (AP)
|
128
|
IPv6 Basic Protocol
|
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, stateless auto-configuration, and Path MTU Discovery
|
IP Routing
|
The following are supported: Static routing RIP and RIPng OSPFv2, OSPFv3, IS-ISv4, and IS-ISv6 BGP4, and BGP4+ Equivalent routing Packet-based load balancing, and flow-based load balancing MCE
|
Multicast
|
The following are supported: IGMP v1, v2, v3, and IGMP proxy IGMP v1, v2 and v3 Snooping IGMP filtering, and IGMP fast-leave PIM-DM, PIM-SM, and PIM-SSM MLD Snooping, and MLD PIM for IPv6
|
MPLS
|
MPLS L3VPN
|
ACL
|
The following flexible and diversified hardware ACLs are supported: Standard IP ACLs (IP-based hardware ACL) Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port IDs) MAC-based extended ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
Time-based ACLs Expert-level ACLs (hardware ACLs based on flexible combinations of Ethernet type, MAC address, IP address, TCP/UDP port ID, protocol type, and time) ACL80 IPv6 ACLs
|
QoS
|
The following are supported: Port traffic identification Port traffic rate limiting 802.1p/DSCP/ToS traffic classification Eight priority queues per port SP, DRR, SP+DRR, RED/WRED queue scheduling mechanisms
|
Security Features
|
The following are supported: 3-tuple binding (IP address, MAC address, and port)3-tuple binding (IPv6 address, MAC address, and port) Filtering of invalid MAC addresses Port- and MAC-based 802.1x authentication MAB authentication Portal authentication and Portal 2.0 authentication ARP-check DAI ARP packet rate limiting Gateway ARP spoofing prevention Broadcast storm suppression Hierarchical management of administrators and password protection RADIUS and TACACS+
|
Security Features
|
AAA for device login management SSH BPDU Guard IP Source Guard CPP, and NFPP Port protection
|
Management Features
|
SNMP, CLI (Telnet/Console), RMON, SSH, Syslog, NTP/SNTP, SNMP over IPv6, IPv6 MIB support for SNMP, SSHv6, Telnet v6, FTP/TFTP v6, DNS v6, NTP for v6, and Traceroute v6 This switch supports sFlow, and samples its traffic information by using the random sampling technology of data flows.
|
High Reliability
|
The following are supported: VSU (virtualization technology, which virtualizes multiple devices into one), GR for RIP/OSPF/BGP and other routing protocols, BFD detection, ERPS (G.8032), REUP, RLDP, power supply 1+1 backup, and the hotswappable function supported on the power supply
|
Zero Configuration
|
CPE WAN Management Protocol (CWMP(TR069))
|
PoE
|
Unsupported
|
Dimensions (W × D × H)
|
442 mm × 340 mm × 44 mm
|
Rack Height
|
1RU
|
MTBF (hours)
|
>200K
|
Power Supply
|
AC input: Rated voltage range: 100 V to 240 V Maximum voltage range: 90 V to 264 V Frequency: 50/60 Hz HVDC input: Rated voltage range: 240 V Maximum voltage range: 192 V to 288 V
|
Power Consumption (full load)
|
60 W
|
Fan
|
2 built-in fans Fan speed regulating and alarm function
|
Temperature Alarm
|
Supported
|
Temperature
|
Operating temperature: 0oC to 45oC(without an expansion card), 0oC to 40oC (with an expansion card) Storage temperature: -40oC to 70oC
|
Relative Humidity
|
Operating humidity: 5% to 95%(no condensation) Storage humidity: 5% to 95%
|
Operating Altitude
|
500m to 5,000m
|
Lightening Protection on Communication Port
|
6kV (Common Mode)
|
Lightning Protection on Power Port
|
Common Mode 6KV/Differential Mode 6KV
|